Search results

Finger Weeder

Finger weeders are a cultivation tool which use ground driven, rubber, star shaped discs to disturb the soil very close to the cultivated crop. Their main advantage is their ability to reach in row weeds. They do not damage the cultivated crop because of the soft rubber which they are made of. They are best for transplanted or well-established crops because they can damage smaller crops.

Pedal Power Hydraulic Log Splitter

Uses pedal power and a hydraulic power unit to split fire wood.

Chicken Coop Sensor

This is a wireless, solar powered chicken coop sensor that measures ambient temperature and relative humidity inside of a chicken coop. It is made out of the internals of the soil/garden sensor that I posted here.

Poultry Water Heater

A simple, low-cost solution to keep your poultry waterer from freezing. I needed a heater to prevent my chickens' water from freezing and looked at what was available commerically. What I found was just too expensive, around $80.00, so I decided to attempt to make my own. My first attempt was to build a wooden box and place a drop light fixture inside. While functionally this worked, I was concerned about the potential fire hazard of the wooden box so I decided to take another stab using metal. The benefit of using the heat tape is that it comes with an integral thermostat factory set to power on at about 40 degrees and off again at about 45 degrees. By turning the pan upside down I now have a heater that looks remarkably like those expensive commerically available heaters. I set my water container on top and I can tell you it works like a charm! My total cost? $30.00 for new parts and of course there is some value to the miscellaneous stuff I had laying around too, so maybe $35.00 which I consider quite a bargain.

Sweat Box Germination Chamber

A "sweat box" style germination chamber built using readily available parts and a broken chest freezer. Early season germination can be inconsistent without a closely controlled environment for starting seeds. Commercial greenhouses use similar systems but the cost can be prohibitive for the small vegetable grower.

Ndicea Nitrogen Management

I nicked it from the Louis Bolck Institue. I tried to find the copy right rules, but couldn't, so I expect an open source program to be open source. http://www.ndicea.nl/index.php It might be usefull for some of you guys, or maybe some digital wizard who want's to write some more coding in order for it to be even more usefull (eg more application with this one program)