Image:
Exclude from the Tools list. This is "sandboxed".:
Skills:
Revisions for Custom 3D printable Jang Seeder Rollers
| Tue, 04/14/2015 - 4:17pm by jellenbogen | Tue, 04/14/2015 - 4:23pm by jellenbogen | ||
|---|---|---|---|
| next diff > | |||
| Changes to Short description | |||
| - | We decided to make some custom versions of seeder rollers for a Jang seeder. So far we have adapted the YX-24 and LJ-24 to become YX-48 and LJ-48 rollers. We have basically doubled the amount of seeds that are planted per revolution of the seeder wheel. Instead of alternating seeds one at a time on each side of the wheel, our wheel drops two seeds at a time. We also made the holes slightly deeper on the LJ-48. | + | We decided to make some custom versions of seeder rollers for a Jang seeder. So far we have adapted the YX-24 and LJ-24 to become YX-48 and LJ-48 rollers. We have basically doubled the amount of seeds that are planted per revolution of the seeder wheel. Instead of alternating seeds one at a time on each side of the wheel, our wheel drops two seeds at a time. We also made the holes slightly deeper on the LJ-48.
|
| + | |||
| + | STL and Solidworks files are available for download at the link below....
| ||
| + | http://www.thingiverse.com/thing:771742
| ||
| + | |||
| + | Please let me know what you think and if you actually print and use the seeder wheels. We used the YX-48 to increase the density of our arugula planting and the LJ-48 for our beet seeds.
| ||
| + | |||
| + | Enjoy,
| ||
| + | Jeff
| ||
| + | |||
Revision of Tue, 04/14/2015 - 4:23pm:
Revisions
Edit This Wiki
STL and Solidworks files are available for download at the link below....
Please let me know what you think and if you actually print and use the seeder wheels. We used the YX-48 to increase the density of our arugula planting and the LJ-48 for our beet seeds.
Enjoy, Jeff