Tough inexpensive pig waterer

Primary tabs

Problem Statement Pigs are very rough of equipment and will chew, drag and rub. "Pig proofing" is especially challenging in a pasture situation with nothing to secure things to. A water system must be able to withstand abuse and also stay clean and functional. This tool was created to address the challenge of building a dependable water system for pigs that can be made with off the shelf components quickly and on farm.

Assembly

assemble 3/4" pipe fittings with pig waters attached as shown in the photos. Materials list is roughly as follows:

4 x 90ยบ elbows 4 x 3/4" pipe nipples (threaded straight pipe) 2 x pig waterer nipples 1 x 3/4 "Tee" 1 x 3/4 to female hose adapter PVC and handle as described concrete

Pour concrete using 12" sonotube and then peel it off after the concrete dries.

Don't forget a handle. I made my 1/2" brass set up a T with arms coming up and hooking for pig nipple screw in. You can get them at Agway or TSC. Don't use iron pipe, I've heard it's not good for potable water.

You'll need a 1/2" female pipe thread to 3/4" female hose thread piece to attach hose inside the removable PVC part. I used a PVC cap with 1/2" hole drilled for pipe cemented in and then just sawed off a piece that I can take on and off so I can get to hose attachment, otherwise pigs eat the hose attachment.

The quick attach hose parts don't last because pigs might move waterers around and eventually the side action breaks them off. Screw on seems to do fine. With good hose and lots of entertainment in the woods running around, the pigs didn't mess with the hose much.